Home The Dungeon Our Medieval Games Room Members Armies & Collections News Site & Hobby News FAQs Frequently Asked Questions Projects Terrain & Modelling Reports Events & Games Game Ideas PDFs & Scenarios For Sale Used stuff Vigilus Campaign Links Hobby Related Links Search Contact Us 日本語バージョン LOGIN
BIO SCANNER
5 users

MENU

 ► The Dungeon
 ► Members
 ► News
 ► FAQs
 ► Projects
 ► Reports
 ► Game Ideas
 ► For Sale
 ► Vigilus
 ► Links

Home : ホーム > Projects : 作品 > Terrain 情景モデル >

Review: MDF Terrain 木材ボード情景モデルのレビュー

by David on 2012-12-21 (Fri) 17:07PM

I spotted these interesting flat packs for terrain on the net the other day, made from cut MDF boards. Worth a try? Let's find out...

 

木材ボードで情景モデルか?!見てみよう。。。

 

Website: http://www.miniature scenery.com/

 

Value 価格:

They have a variety of model packs, from simple things like wood bases, all the way up to this rather complex industrial pipeworks. While the variety on offer is pretty good, most of the options (houses and adobe buildings etc) are available in other materials for similar prices from other makers. Instead, I decided to try out the models below. Firstly, we have a neat pipeworks complex, which impressed me because the painted example (below) looks really convincing, and also because it can be rearranged (and presumably stored easily) in different configurations. The price was Australian $40 AUD, which comes out to about 3500 yen.

 

メーカーホームページ(オーストラリア)にはいろいろな情景モデルはありますが、ほとんどはファンタシー建物や40Kオルク建物でした。自作でもできるのでパスしました。今回、以下のデザインは特にユニークだと思ったので、40Kのパイプ工場セットとエルダーのセットにしました。パイプ工場は約3500円です。


These next models seemed very original, as I haven't really seen good Eldar 40K terrain before, and again the prices were not bad. Top left is a tower building ($45 - 4000 yen), top right is some mysterious gizmo ($18 - 1600 yen for two, I'm using mine as force field generators), bottom left is a walkway ($25 - 2200 yen) and finally a large platform ($25 - 2200 yen), which I'm probably using as a webway portal or teleport. I decided to get one of each, which together with the pipeworks came to $155 plus $43 shipping to Japan - approximately 17,500 yen. That didn't seem too unreasonable for terrain that will probably cover over half a table.

 

エルダーの情景モデルはなかなか見ないでしょう?以下の新作キットはエルダーにぴったりと思ったので、1個ずつ買いました。

  • 左上:4000円
  • 右上:二個で1600円
  • 左下:2200円
  • 右下:2200円

パイプ工場と一緒に合計17,500円、送料含めて。




 

Construction 組立式:

After approximately 3 weeks this large pack of 5 terrain kits turned up at the door from Australia. Each of the kits is made up of two or three separate 3mm MDF A4-sized sheets, neatly plastic wrapped with simple diagram instructions.

 

各キットには、3ミリの木材ボード2枚か3枚が入っていました。説明書はイラスト付きで、分かりやすいだ。


 

Taking a look at one of the packs, the "Uridium Space Modulators", I found that they'd actually included 2 sheets of MDF, which seems to be enough for 4 pieces of terrain, rather than 2 as I was expecting. Cool! Anyway, the MDF boards seem to be pretty neatly cut on their sprues, and I passed along the cutting-out job to Euan...

 

組立式キットの内容はこんな感じでした。カット機会がきれいに切れましたので、品質がよかった。そして、開いたときに注文間違えが見つけました - このモデルを2個ではなく、4個もらいました!嬉い!


 

And here is our budding modeller, carefully cutting out all the pieces with a pair of GW cutters. A very easy job, although a little messy on your table! A couple of the fiddlier parts (triangle shaped ends etc) were left to me to carefully saw through with a mini-saw, as I suspected they might distort if squeezed by the cutters.

 

ユアン君(7歳)がランナーからニッパーで切りました。二人で結構楽しかった!


 

Although Euan had fun cutting all the sprues out, the "Dais" platform kit was the first one I wanted to try out myself, as it seemed the simplest. This photo is the test assembly of the kit once all the pieces had been cut out, and you can see each piece has at least 2 sprue joins that needed to be trimmed and sanded later. Still, it goes together smoothly, and the inset cut design looks really cool.

 

以下の写真は「Dais」のプラットフォーム情景モデルでした。幅が約20cmですので、多目的モデルになると思います。何でしょう?テレポート機械?このキットは一番簡単と思ったので、最初に作成してみました。以下の写真は切った後の状態でした。まだまだです。。。


 

The next job was to trim off the sprue joins with a sharp knife, and then gently smooth down all the edges with fine-grade sandpaper. Quite a messy job, and my knife finger was pretty sore after all the cutting!

 

一つずつでパーツをカッターとサンドペーパーで丁寧にスムーズな出来上がりまでできました。

 

After the model was glued together (dead easy!) with wood bond, I gave some thought to finishing touches. I felt that the model was missing an essential element of Eldar architecture - those odd half oval domes that appear here and there on their vehicles and armour. After much searching in craft shops with no luck at all, I finally found what I was looking for in the supermarket. These dense beans had a lovely smooth finish, and if I could slice them in half they would fit the job perfectly!

 

次は木材ボンドで組み立てました。モデルはこのままでよかったが、一つは足りなかった。エルダーのタンクやアーマーには卵形のドームがあるじゃない?やはり、それが足りなかっただ。どうしよう?まずは100円ショップやクラフトショップで探しましたが、なかなか見つかりませんでした。やっとスーパーで見つけました。豆だ!半分に切って、どうでしょう?


 

And here we have the finished terrain kit, plus beans! Altogether, I think it's excellent value, and although sanding the pieces is a little time intensive, the finished model looks really great. I'm really looking forward to painting this unique terrain set in suitably wraithboney colours and battling my way across an Eldar maiden world for the very first time!

 

完成のモデルはこうなった。いかがでしょうか?サンドペーパーのスムージングはやはり時間かかったが、最後の出来上がりは最高だと思っています。ペイントは本当に楽しみにしています!


 

UPDATE:

Painting progress report here >>
情景モデルのペイントはこちら >>


1 Comment :



Mike   2012-12-26 (Wed) 17:00PM
That is some really cool terrain. It will look real nice painted up.





Write a comment :
Name
Comment
Code




NEXT :
Eldar Terrain エルダー情景モデル >>
2013-01-14 (Mon) 13:39PM


Random Images:

▲TOP▲

MISSION TIME
  • :
  • :

🔰 初めての方はこちら
ホビーグッズの購入案内

Links

🔰 初めての方はこちら
ホビーグッズの購入案内


◉ U/21 : Undercroft

<<

>>


CAM: U/21
Connecting